Latest Contractor Support Articles
Gain full access to all articles by logging into the Contractor Support Portal.
SES Spray Foam Insulations
Highest Yields
No Mixing Required
Our EasySeal® .5 Open Cell Spray Foam open cell spray foam features no mix processing, producing exceptional foam for a wide range of temperatures and processing parameters, along with high r-values and the highest yields in the industry.
Environmentally Responsible
Increased energy efficiency:
– Qualifies projects for energy
efficient mortgages and other
programs
– Reduces AC tonnage
requirements by almost 50%
Drastically improved air quality:
– Addresses needs of those
sensitive to airborne
contaminants.
– Lowers the building’s carbon
footprint.
High Quality
No mixing required:
– Peace of mind the product you
expect is the product you get.
– Reduced costly install cycle times.
Engineered for all conditions:
– Can be applied in extreme
conditions where others fail.
Designed to go only where you want it to go:
– Most overspray can simply be
removed with a dry cloth.
– Will not stain or leave spots on
precious material that may come
into contact with typical
overspray.
Benefits At A Glance
Highest Yields In The Industry
UL P522 Approved
– Allows Wet Sprinkler Systems
in Attics vs Dry Systems.
UL L521 Approved
– Eliminates Sprinkler System
in Combustible Spaces.
ICC ES AC377 Appendix X
– Appendix X Approved with intumescent coating.
Qualifies For LEED Points
CA Dept of Health Approved:
– Ultra Low VOC emitting
Highest Yields Sucrose Formulation
Passes Appendix X Uncoated
SucraSeal® Open Cell Spray Foam is the only low density spray foam technology to pass the ICC ES AC377 Appendix X Fire Test without an ignition barrier, is endorsed by EnergyStar for outstanding energy efficiency, and is USDA Bio-Preferred, boasting the highest bio-content in the industry.
Environmentally Responsible
17% Bio Based:
– The highest in industry
Increased energy efficiency:
– Qualifies projects for energy
efficient mortgages and other
programs
– Reduces AC tonnage
requirements by almost 50%
Drastically improves air quality:
– Addresses needs of those
sensitive to airborne
contaminants.
– Lowers the building’s carbon
footprint.
Passes Appendix X Testing
ICC ES AC377 Appendix X
– Eliminates unsightly pull down
attic hatch requirements.
– Eliminates incapsulating attic
ducts and skylights.
– Eliminates internal AC fire/
smoke auto shut off
requirements.
– Eliminates attic cubic footage
limitation requirements.
– Eliminates possible down
stream liabilities.
– Only Low Density foam to
pass without an ignition
barrier.
Benefits At A Glance
Highest Yields Sucrose Formulation.
UL Certified:
UL Designs for rated walls,
floors, and ceilings, including
UL 305 and UL P522 which
eliminates need for dry sprinkler
systems.
NFPA 285 Approved:
– For use in exterior walls of
non-combustible construction.
EnergyStar Approved
Qualifies For LEED Points
CA Dept of Health Approved:
– Ultra Low VOC emitting
Highest Yields HFO Formulation
Ultra-Low GWP
Nexseal® 2.0 Closed Cell Spray Foam cures to a dense state, adding structural strength to the applied surfaces, combining cutting edge performance with Honeywell’s Ultra-Low Global Warming Potential (GWP) Solstice® Liquid Blowing Agent, making Nexseal® 2.0 our most innovative, environmentally friendly product to date. (GWP=1, Same as C0)
Environmentally Responsible
Nexseal™ 2.0 Closed Cell Spray
Foam is formulated with Honeywell’s
Ultra-Low Global Warming Potential (GWP)
Solstice® Liquid Blowing Agent
Drastically improves air quality:
– Addresses needs of those
sensitive to airborne
contaminants.
– Lowers the building’s carbon
footprint.
5 Solutions In 1 Application
5 Solutions in 1:
– Air Barrier
– Vapor Retarder
– Bulk Water barrier
– Highest R-value per inch
– 300% increase to structural
strength
PLUS:
Nexseal™ is FEMA Approved
as a Flood-Resistant Insulation.
Benefits At A Glance
Highest Yields HFO Formulation.
UL Certified:
– UL Designs for hourly rated
walls, including U305 and more.
Passes AC377 Appendix X:
– Never requires ignition barrier.
NFPA 285 Approved:
– For use in exterior walls of
non-combustible construction.
ABAA Certified
Qualifies For LEED Points
FL Building Code Approved:
– Increases Racking Strength
CA Dept of Health Approved:
– Ultra Low VOC emitting