Lower Bills, Whole Home Comfort

providing lower energy costs, improved indoor air quality,

SES Insulations provide optimum performance,

and equalized room temperatures across multi-level homes.

Find A Local SES Insulation Provider

Our EasySeal .5™ open cell spray foam features no hassle processing, producing exceptional foam for a wide range of temperatures and processing parameters, along with the high yields and r-values you’ve come to expect from SES Foam.

Environmentally Responsible

Increased energy efficiency:
– Qualifies projects for energy
efficient mortgages and other
programs
– Reduces AC tonnage
requirements by almost 50%
Drastically improved air quality:
– Addresses needs of those
sensitive to airborne
contaminants.
– Improved comfort highlights
the quality of your design.

High Quality

No mixing required:
– Peace of mind the product you
specified is what you get.
– Reduced costly install cycle times.
Engineered for all conditions:
– Can be applied in extreme
conditions where others fail.
Designed to go only where you want it to go:
– Most overspray can simply be
removed with a dry cloth.
– Will not stain or leave spots on
precious material that may come
into contact with typical
overspray.

Benefits At A Glance

UL P522 Approved
– Allows Wet Sprinkler Systems
in Attics vs Dry Systems.
UL L521 Approved
– Eliminates Sprinkler System
in Combustible Spaces.
ICC ES AC377 Appendix X
– Appendix X Approved with intumescent coating.
Qualifies For LEED Points
CA Dept of Health Approved:
– Ultra Low VOC emitting

SucraSeal™ Open Cell Spray Foam is the only low density spray foam technology to pass the ICC ES AC377 Appendix X Fire Test without an ignition barrier.

Environmentally Responsible

17% Bio Based:
– The highest in industry
Increased energy efficiency:
– Qualifies projects for energy
efficient mortgages and other
programs
– Reduces AC tonnage
requirements by almost 50%
Drastically improves air quality:
– Addresses needs of those
sensitive to airborne
contaminants.
– Improved comfort highlights
the quality of your design.

Passes Appendix X Testing

ICC ES AC377 Appendix X
– Eliminates unsightly pull down
attic hatch requirements.
– Eliminates incapsulating attic
ducts and skylights.
– Eliminates internal AC fire/
smoke auto shut off
requirements.
– Eliminates attic cubic footage
limitation requirements.
– Eliminates possible down
stream liabilities.
– Only Low Density foam to
pass without an ignition
barrier.

Universally Certified

UL Certified:
UL Designs for rated walls,
floors, and ceilings, including
UL 305 and UL P522 which
eliminates need for dry sprinkler
systems.
NFPA 285 Approved:
– For use in exterior walls of
non-combustible construction.
EnergyStar Approved
Qualifies For LEED Points
CA Dept of Health Approved:
– Ultra Low VOC emitting

Nexseal™ 2.0 Closed Cell Spray Foam combines cutting edge performance with Honeywell’s Ultra-Low Global Warming Potential (GWP) Solstice® Liquid Blowing Agent, making Nexseal™ 2.0 our most innovative, environmentally friendly product to date. (GWP=1, Same as C0 )

Flexible Design

Nexseal™ 2.0 Closed Cell Spray
Foam expands to fill gaps and
hard to seal irregular shapes,
allowing you to design freely
without the restrictions of
traditional insulation systems.
Drastically improves air quality:
– Addresses needs of those
sensitive to airborne
contaminants.
– Improved comfort highlights
the quality of your design.

5 Solutions In 1 Application

5 Solutions in 1:
– Air Barrier
– Vapor Retarder
– Bulk Water barrier
– Highest R-value per inch
– 300% increase to structural
strength
PLUS:
Nexseal™ is FEMA Approved
as a Flood-Resistant Insulation.

Universally Certified

UL Certified:
– UL Designs for hourly rated
walls, including U305 and more.
Passes AC377 Appendix X:
– Never requires ignition barrier.
NFPA 285 Approved:
– For use in exterior walls of
non-combustible construction.
ABAA Certified
Qualifies For LEED Points
FL Building Code Approved:
– Increases Racking Strength
CA Dept of Health Approved:
– Ultra Low VOC emitting

Click Image Below View Optimum Uses Of Spray Foam

Knowing where to use SES SucraSeal Open Cell or SES Nexseal 2.0 Closed Cell in a project is key to optimal insulation performance. Click to see suggestions on where to use our innovative spray foam insulations.

Innovative By Design

SES Spray Foam Insulations push the envelope of performance, providing high yields and high R-values while passing the Appendix X Fire test uncoated and boasting the highest bio-content in the industry. By providing optimum insulation, air and thermal seals in one application across challenging designs, there is no limit to the types of projects SES spray foams can tackle.

SucraSeal™ and EasySeal™ Open Cell Spray Foam, and Nexseal™ 2.0 Closed Cell Spray Foam provide energy efficiency, comfort, and piece of mind for the life of the building. Specifying SucraSeal™, EasySeal™ or Nexseal™ 2.0 in a project can reduce the tonnage of the HVAC System, as well as the time needed to insulate a project, saving valuable construction time and unnecessary costs before the project begins.

Homeowners

SES Spray Foam Insulations provide optimum energy efficiency for your new or existing home. Reduced energy bills, higher home values, improved indoor air quality, and more comfortable room temperatures are just a few of the benefits you can expect.

Homebuilders

Learn how SES Spray Foam can take your insulation offerings to the next level. Give your clients the best available insulation with innovative products that increase structural strength, improve indoor air quality, and lower energy bills.

Architects

Discover how SES Spray Foam Insulations can enable sustainable, energy efficient, and flexible building design. Our universally certified products provide environmentally responsible options aimed at creating better buildings for a better future.