EasySeal

Universally Approved

By providing optimum insulation, air and thermal seals

in one application across challenging designs, there is no

limit to the types of projects SES spray foams can tackle.

Technical Datasheets

Architectural Binder

Innovative By Design

SES Spray Foam Insulations push the envelope of performance, providing high yields and high R-values while passing the Appendix X Fire test uncoated and boasting the highest bio-content in the industry. By providing optimum insulation, air and thermal seals in one application across challenging designs, there is no limit to the types of projects SES spray foams can tackle.

SucraSeal® and EasySeal® Open Cell Spray Foam,  and Nexseal® 2.0 Closed Cell Spray Foam provide energy efficiency, comfort, and peace of mind for the life of the building. Specifying SucraSeal®, EasySeal® or Nexseal® 2.0 in a project can reduce the tonnage of the HVAC System, as well as the time needed to insulate a project, saving valuable construction time and unnecessary costs before the project begins.

SES EasySeal Logo

Our EasySeal® .5 Open Cell Spray Foam open cell spray foam features no hassle processing, producing exceptional foam for a wide range of temperatures and processing parameters, along with the high yields and r-values you’ve come to expect from SES Foam.

Case Study

EasySeal Commercial

Environmentally Responsible

Increased energy efficiency:
– Qualifies projects for energy
efficient mortgages and other
programs
– Reduces AC tonnage
requirements by almost 50%
Drastically improved air quality:
– Addresses needs of those
sensitive to airborne
contaminants.
– Improved comfort highlights
the quality of your design

High Quality

No mixing required:
– Peace of mind the product you
specified is what you get
– Reduced costly install cycle times
Engineered for all conditions:
– Can be applied in extreme
conditions where others fail
Designed to go only where you want it to go:
– Most overspray can simply be
removed with a dry cloth
– Will not stain or leave spots on
precious material that may come
into contact with typical
overspray

Benefits At A Glance

UL P522 Approved
– Allows Wet Sprinkler Systems
in Attics vs Dry Systems
UL L521 Approved
– Eliminates Sprinkler System
in Combustible Spaces
ICC ES AC377 Appendix X
– Appendix X Approved with intumescent coating.
Qualifies For LEED Points
CA Dept of Health Approved:
– Ultra Low VOC emitting

SucraSeal® Open Cell Spray Foam uses proprietary sucrose based technology to pass the ICC ES AC377 Appendix X Fire Test without an ignition barrier and is endorsed by EnergyStar for outstanding energy efficiency, is USDA Bio-Preferred, and boasts the highest bio-content in the industry. 

Case Study

Case Study

SES SucraSeal Commercial

Environmentally Responsible

17% Bio Based:
– The highest in industry
Increased energy efficiency:
– Reduces HVAC tonnage
requirements by up to 50%
– Qualifies projects for energy
efficient mortgages
Improves Indoor Comfort:
– Barrier to outside allergens
and airborne contaminants
improving air quality
– Equalizes room temperatures
across multiple floors

Passes Appendix X Fire Test

ICC ES AC377 Appendix X:
– Proprietary sucrose based
technology passes without
an ignition barrier saving time,
money, and labor
SucraSeal Eliminates:
– Unsightly pull down
attic hatch requirements
– Incapsulating attic
ducts and skylights
– Internal HVAC fire/
smoke auto shut off
requirements
– Attic cubic footage
limitation requirements
– Possible downstream liabilities

Universally Certified

UL Certified:
UL Designs for rated walls,
floors, and ceilings, including
UL U305 and UL P522 which
eliminates need for dry sprinkler
systems
NFPA 285 Approved:
– For use in exterior walls of
non-combustible construction
Green Certifications:
EnergyStar Approved
Qualifies For LEED Points
CA Dept of Health Approved:
– Ultra Low VOC emitting

Nexseal® 2.0 Closed Cell Spray Foam cures to a dense state, adding structural strength to the applied surfaces, combining cutting edge performance with Honeywell’s Ultra-Low Global Warming Potential (GWP) Solstice® Liquid Blowing Agent, making Nexseal® 2.0 our most innovative, environmentally friendly product to date. (GWP=1, Same as C0)

Case Study

Case Study

NEXSEAL Commercial

Flexible Design

Nexseal™ 2.0 Closed Cell Spray
Foam expands to fill gaps and
hard to seal irregular shapes,
allowing you to design freely
without the restrictions of
traditional insulation systems
Drastically improves air quality:
– Addresses needs of those
sensitive to airborne
contaminants
– Improved comfort highlights
the quality of your design

5 Solutions In 1 Application

5 Solutions in 1:
– Air Barrier
– Vapor Retarder
– Bulk Water barrier
– Highest R-value per inch
– 300% increase to structural
strength
PLUS:
Nexseal™ is FEMA Approved
as a Flood-Resistant Insulation

Universally Certified

UL Certified:
– UL Designs for hourly rated
walls, including U305 and more
Passes AC377 Appendix X:
– Never requires ignition barrier
NFPA 285 Approved:
– For use in exterior walls of
non-combustible construction
ABAA Certified
Qualifies For LEED Points
FL Building Code Approved:
– Increases Racking Strength
CA Dept of Health Approved:
– Ultra Low VOC emitting

Looking For AIA Certified Courses?

Click below to learn more about our available AIA Course offerings, or to learn how you can specify SES Insulation in your next project.